(1) The bearing of the box should be filled with lubricating grease in time. After running for 500 hours, replace the grease once. (The grease should be added in proper amount before the new machine is operated. The oil should be changed after 200 hours of operation.)
(2) Grease the other bearing parts regularly.
(3) Screws, screw sleeves and other consumables are strictly prohibited during the dismantling process. Hard objects are not allowed to be placed on the expanding chamber.
(4) Expanded raw materials should be cleaned to prevent foreign objects such as metals from entering the machine and damaging the parts.
(5) Check the quality of the extruder at any time and pay attention to replacing the wearing parts.
(6) Keep the area around the equipment clean.
(7) When the machine is used for a long time without using or replacing the expanded material, the materials in the expanding chamber should be cleaned to avoid agglomeration, mildew or cross-contamination between the materials.
(8) Since wearing parts near the discharge port wear relatively quickly, wearing parts close to the feed port end are less worn, so when the wearing parts are replaced, they should be replaced from the discharge end in sequence. part.
Active Pharmaceutical Ingredient,Mupirocin Calcium,Sodium Fusidate Ointment,Fusidic Acid Ointment
Fuzhou Contay Biotechnology Co., Ltd , https://www.contaybio.com