First, clean the dirt and weeds on the tractor. Second, clean the air filter, first use diesel oil to clean the filter, then use oil to infiltrate, remove and wait until the excess oil drips from the filter and then assemble. In addition to installing the gasket, the oil pan should be filled with clean lubricant to the mark position. Third, remove the exhaust pipe and clean the dirt and sand inside. Fourth, remove the cylinder head, remove the valve group, wash the soil, remove rust, grinding valve. 5. Remove vortex chamber inserts and clean impurities. When the main spray hole and start hole on the insert block, the hole can be dredged with a bamboo stick. 6. Remove the connecting rod nut, remove the piston rod and clean it. The carbon deposit on the piston should be removed with a copper spatula or a bamboo stick. Use of ironware is strictly forbidden to damage the piston. 7. Drain the dirty oil in the fuel tank and clean the fuel tank, diesel filter, and fuel injection pump. 8. Turn open the water switch, release the cooling water, flush the impurities in the cooling water with water until the water is discharged from the water. Nine, release the oil in the oil pan, use diesel oil to clean the oil pan, filter. After washing, add a mixture of oil (2/3 oil, 1/3 diesel oil), shake the oil shaft several revolutions, clean the lubricating oil path, and then release the mixed oil, and add the clean oil to the specified scale position. 10. Remove the clutch, clean the parts with some oil, dry them after washing and then install them. 11. Release the lubricant in the gearbox, wash it with diesel oil, and add clean gear oil. Twelve, clear the sand inside the tire. Clean the dirt on the ball. Adjust the front wheel speed and the steering wheel's freewheeling angle. Thirteen, disassemble the brake, clean the mud of the brake hub and brake pad, dry it and then install it. 14. Clean the dirt inside the electrical equipment, do the drying process on the coils, check the insulation and electrical conductivity, remove the dirt from the poles of the battery, and apply butter on the line cards and poles. Unscrew the filler cap, clear the vent, and use distilled water to clean the contents of the battery. After washing, add electrolyte to charge.
Electronic Obstetric Bed
Electronic obstetric bed are specially designed delivery babies, which provide the expectant mother positioning for the individual exam situation. The adjustment of seat height and inclination on the obstetric bed provides the pregnant mother with a relaxed seated position and better access to the examination area. As a rule, gynaecology chairs are fitted with comfortably upholstered leg supports. Usually the steering of the gynaecology chair is done with a foot pedal or handle so that the doctor can easily adjust the chair during an examination.
Except Electronic obstetric bed, we also supply Gynecological Table for gynecological examination.
Combined with the examination, Yingmed also supply Disposable Gynecological Examination prodcuts like Cervical rambrush, Amnicotomu hook, Cervical scraper and Surgical gloves.
Electronic Obstetric Bed,Foldable Electronic Obstetric Bed,Medical Electronic Obstetric Bed,Hospital Electronic Obstetric Bed
NINGBO YINGMED MEDICAL INSTRUMENTS CO.,LTD , https://www.chinayingmed.com