Sea pelt processing technology

The main raw materials are jellyfish, alum and salt.
Equipment equipment cylinder or ground.
Production method After harvesting the jellyfish, the head should be cut off with a knife in time. After the head and the skin were washed with seawater, the red pier was removed with a knife. The red cloth and the mucus on the back were scraped off with a bamboo plate, washed with seawater, placed in a clean cylinder (pool), and then poured into a concentration. For 5% of alum water (a ratio of 250-300 grams per 50 kilograms of sea bream is completely water-soluble), stir well to prevent breakage of the skin and retting for about 10 hours. Remove the water from the early sea lice for half an hour, and then press the water for the skin after licking the water. Use 7.5 to 9 kg of salt and ytterbium per 50 kg (5:0.2 to 0.25 for salt and cesium) ]. First spread the salt mixture to the bottom of the pool. Then sprinkle a salt pan between each of the pelt skins. Scatter the thick skin. Every 3-4 sheets is a rake. A layer of salt is capped, and the seal is used for 5-7 days, after which it is drained for half an hour, and the brine and dirt on the pelt skin are cleaned with clean water, and the swill is then treated. The skin weight is 7-8 kg (5: 0.075 salt to rubidium ratio) per 50 kilograms of salt, and the jellyfish skin is evened out and evenly sprinkled with a mixture of salt and rubbish. In the middle, the top is covered with salt, pickled for 7 to 8 days, and the final luminosity is 220-240 Baume concentration. The jellyfish jellyfish after three days are rinsed with brine and wiped off with a fine cement coat, etc. The erythema, after plastic surgery, will be crushed on the wooden side of the cortex layer and drained, smashed 66 centimeters high and can be drained and marinated for 7 days, during which time it should be flipped 1-2 times. brine DDT is appropriate, remove the grading, weigh it into a plastic bag, fold it flat, spread salt evenly, pack it, and store it in a cool place.If it cannot be packaged in time, place it in 4% salt water to ensure quality. It can be immersed in the immersed oyster sauce and not dried.The tanned leather color is glossy, no red, toughness, no silt, loose meat, no odor.
Process fishing → go to the head → dip → the first time → second time → three times → dry → packing → finished product.

Urinalysis Reagent Strip

1. urine analysis strip is dry chemical reaction principle, the human body in the urine of white blood cells, proteins, ph, urine specific gravity, ketone body, bilirubin, occult blood, nitrite, uric bravery, glucose, creatinine, vitamin C, calcium within ten three indexes such as qualitative and semi-quantitative detection.

2. For the use of this product, we must pay attention to several points. For example, at the beginning, we should immerse all the reagent part on the urine analysis strip into the sample, and then take it out immediately.

3. Additionally, the edge of the urine analysis strip should be gently brushed along the mouth wall of the sample container to remove excess urine. Then place the reagent block on the urinalysis strip horizontally up and compare with the color map to record the results.

Rational use of urine analysis strip has played a very good role in our timely detection of disease and timely treatment

Factory Ce Approved Fast Urine Strip Urinalysis Reagent Strips Test Kit5

[Test Principle]

Urobilinogen:Urobilinogen with diazonium salt produce red violet dyes in strong acid medium.

Bilirubin:The direct bilirubin with dichlorobenzene diazonium produce azo dyes in acid medium.

Ketone:The acetoacetic acid and sodium nitroprusside cause reaction in alkaline medium,which produces red violet compound.

Blood:Hemoglobin acts as peroxidase. It can cause peroxidase release neo-ecotypes oxide (O).(O) oxidizes the indicator and make the color change subsequently.

Protein:It is based on a specific pH indicator attracted by cation on protein molecule,the indicator further ionized and make the color change.This phenomenon is called protein-error-of -indicator principle.

Nitrite:Nitrite and aromatic amine are diazotized to form a diazonium compound.The diazonium compound reacts with tetrahydrobenzo(h)quinolin 3-phenol produce the red azo dye.

Leukocyte:Pyrrole amino acid ester produce free phenol under the hydrolysis of esterase in neutrophile granulocyte,the free phenol couple with phenyl diazonium salt produce purple azo dyes.

Glucose:The glucose oxidized by glucose oxidase catalyzes the formation of glucuronic acid and peroxide hydrogen.Peroxide hydrogen releases neo-ecotypes oxide(O)under the function of peroxidase.(O)oxidizes tetramethyl benzidine, which make the color change.

Specific Gravity:Methyl vinyl ether and maleic acid copolymer is weak acid (-COOH) exchanger,the M+ cation (the major is Na+) in urine reacts with the exchanger and release hydrogen ion,hydrogen ion reacts with indicator produce color change.

pH:The method of pH indicator is applied.

Ascorbic Acid:Ascorbic acid deoxidizes the 2.6-dichlorphenolindophenol dye into colorless in alkaline medium.

Microalbumin:Sulfone phthalein dye has high sensitivity to microalbumin by the method of protein error.

Creatinine:Creatinine with 3,5-Dinitrobenoic acid produce violet compound in alkaline medium.

Calcium:Calcium ion reacts with methyl bromothymol blue produce color change in alkaline medium.

Urinalysis Reagent Strip,Urine Strips,Urine Reagent Strips,Urine Reagent Strips For Urinalysis

Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com

Posted on