The heat preservation part of the constant temperature and humidity box:
First, the selection of measures to choose the instrument with insulation device. According to the type of use of the instrument and the geographical location to be installed, the insulation and antifreeze requirements of the instrument are proposed and submitted to the manufacturer for processing. In some places in the north, the temperature difference between day and night is too large, and it can reach more than -20 degrees at night. If it is solved from the selection, the price/performance ratio is quite large.
Second, the insulation measures are insulated with insulation materials, that is, the insulation materials are used to wrap the parts that are easy to freeze or freeze. In winter, it is necessary to inspect and regularly discharge the sewage to prevent damage to the insulation material of the package.
Third, heat-receiving measures 1, steam heating measures that use pipe steam heating insulation. Before the steam is supplied in winter, check whether the steam insulation pipe is unblocked or blocked.
2, insulation protection box measures 3, electric heating belt measures: electric heating insulation technology is a new type of heating technology that directly converts electrical energy into heat. Install insulation cable, wrap the heating cable around the meter, or stick it inside the instrument cabinet (but pay attention to the length of the heating cable used, it should be economical).
Maintenance measures for constant temperature and humidity chamber:
1. Installation measures Reasonable choice of installation location: dry, no rain and snow dripping.
2. When the inspection measures are met, the special person shall daily confirm whether the insulation material is damaged or whether the steam pipeline is blocked or not.
3, the alarm measures can be added to the sound leakage alarm device in the state of steam leakage or power failure, in order to facilitate the discovery and timely remediation of hidden dangers of insulation and antifreeze measures.
4. The inspection measures shall be patrolled by the responsible person of the regional instrument maintenance according to the scheduled inspection route. During the inspection, it is necessary to check whether the insulation pipeline valve is normal, whether the insulation tank is normal, whether the hydrophobic device is normal, whether the insulation material packaging is intact, and whether the electric heating supply component is normal.
Our Tattoo Grips , Tattoo Grip , Tattoo Machine Grips, Disposable Tattoo Grip, Aluminium Tattoo Grip, Stainless Steel Tattoo Grip is good in quality and competitive in price.
We are manufacturer and supplier of Tattoo Grips following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you!
We would provide professional Tattoo Grips with good services for you!
pre-steriled with E.O. gas,Fit for all tattoo machines,New design,slightly smaller in the ends makes it better fit in hands,Comfortable non slip grip
Tattoo Grips
Tattoo Grips, Tattoo Grip, Tattoo Machine Grips, Disposable Tattoo Grip, Aluminium Tattoo Grip, Stainless Steel Tattoo Grip
Paddy Irons Tattooo Factory , http://www.paddyironstattoo.com