Sealing machine A machine often used in the industrial and food industries. After the packaging container is full of articles, the sealing of the container is often processed on the sealing machine. The sealing machine should pay attention to the following 11 aspects in the process of use, so as to avoid unnecessary damage to the sealing machine.
1. It is not suitable for metal containers and metal covers. It is not allowed to press the start button on the metal table, otherwise it will damage the machine.
2. Insert the induction air plug and tighten the screw before turning on the power.
3. Use single-phase three-wire power cord. For operator safety, be sure to use single-phase three-wire power socket. The work floor must be dry to keep insulation.
4, with temperature overheating automatic protection function, when the internal temperature of the machine is overheated, the buzzer sounds in the machine " abnormal protection (PRO. MD.)" yellow indicator light, at this time should turn off the main power switch, standby cooling After the buzzer stops, continue working.
5. During the working process, always touch the surface of the sensor head to check whether it is overheated. If it is found that the hot hand should stop heating, it should work after cooling (cooling can not turn off the power), when the “WARM UP†green indicator light is off, Do not press the start button to avoid false triggering. When the unit is finished, turn off the power switch on the panel.
6, equipped with a fuse of 5A, not available for greater than 5A insurance instead.
7. There is high voltage inside, the bottom plate is charged, and it is strictly forbidden to repair it personally to avoid personal electric shock.
8. If it is found that there is a bare wire before use, stop using the machine and use it after repair.
9. The equipment should not be impacted, stressed or damp when transported, stored or used.
10. When the product is inspected and checked out, in the case of normal transportation and good packaging, if the parts of the product are found to be inconsistent with the packing list, they should contact the company in time.
11. According to the instruction manual, the operation should be clearly understood in advance. If the quality of the product is found, the company will explain to the company within the prescribed time limit. The equipment is guaranteed for half a year and is responsible for maintenance.
Note: There is limited current protection inside the machine. When the area of ​​the sealed aluminum foil is too large, or close to the induction coil, the output will be automatically turned off, the buzzer will sound long, and the panel “Exception Protection (PRO. MD.)†The yellow indicator lights up until it is restored.
When installing security Outdoor Camera, you should first choose the monitoring host. Do you want to add a monitoring card to your computer, or do you want to use an embedded hard disk recorder as your monitoring host. The computer monitoring card is more suitable for places that are familiar with computer installation, have professional personnel on duty, and have more functional requirements. Its overall investment is relatively low. Since the monitoring card is installed in the computer, the computer needs to be started 24 hours a day; As for the latter, it does not require professional knowledge, nor does it need to be on duty, and it is relatively simple to operate.
To install security monitoring equipment, it is necessary to determine how many cameras are installed, and the quality and monitoring range of the cameras are affected. It is preferred to determine how many cameras are used for monitoring, and then determine the camera lens monitoring range according to how many cameras are available. Therefore, the distance from the camera to the monitoring point and the monitoring area must be clear. The infrared supply network recommends using the camera of 480 TV line, because it is more in line with that definition.
When installing security monitoring equipment, the third consideration is whether the camera has night vision function. If the monitoring is installed in a dark place, it is necessary to consider using a camera with infrared night vision function.
The security monitoring equipment can be installed via wired or wireless transmission. Although the cost of wireless network is relatively high, it can save a lot of installation trouble and make the monitoring site more beautiful. However, the installation of wireless network monitoring equipment should take into account the environmental problems of security sites. Cement building materials will shorten the wireless transmission distance, and metal building materials may complete the shielding of wireless signals. The infrared transmitter and infrared receiver should be far away from other appliances to avoid interference. Because the price of wireless network is almost twice that of wired transmission monitoring equipment, I suggest using wired transmission installation.
On site monitoring and network monitoring When determining the installation of the monitoring system, you should consider whether you need network functions. That is, if you need to monitor and control the monitoring site on the Internet at any time, you need to select a monitoring host with network functions. Avoid no network transmission function after installation.
A complete security monitoring equipment should at least have three parts: surveillance camera, PTZ and decoder. The following are their installation methods:
Outdoor Network Wireless Camera,Network Wifi Camera,4g Outdoor Solar Powered Camera,Solar 4g Cameras,Solar Powered Cctv Camera
Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcamera.com