Although the use of different types of 3D motion mixer equipment can play a role in mixing, but different models will have some differences in use. The SYH series three-dimensional motion mixer barrels are over-arced and precision polished. The mixing cylinder moves in multiple directions, and the mixing, rotation and tumbling are uniformly mixed in the cycle, and the mixing rate is more than 100%, which is an ideal product in various mixers.
Operation principle 1. Three-dimensional motion mixer adopts electromagnetic speed regulation (or frequency conversion). Before starting, turn on the main power supply, the power indicator light is on, then start the motor button, then start the on/off switch on the speed control panel (the inverter can touch the button) The indicator light is on and then slowly rotated to achieve the increased mixing speed.
2. After the mixing is finished, turn off the power according to the power-on sequence. If it is found that the material is not ideal, you can click the button to meet the blanking requirements.
Matters needing attention 1, the mixing of three-dimensional motion mixer is a three-dimensional space mixing, safety fence should be added within the effective operating range of the barrel, so as to avoid life safety accidents, avoid standing before the cylinder before starting, to avoid accidents.
2. When loading and unloading materials, the jog of the equipment must be stopped to prevent the necessary accidents caused by the failure of the electrical appliances.
3. During the operation of the 3D motion mixer, if abnormal conditions are found, stop the inspection immediately, and wait until the accident is hidden.
4, the contact parts of the transmission of the equipment, regular lubrication, grease (three months)
5. The feedback knob and speed control knob of the operation panel must not be changed at will, and the proofreading is good before leaving the factory.
The three-dimensional motion mixer is composed of a machine base, a driving system, a three-dimensional motion mechanism, a mixing cylinder and an electrical control system. The mixing cylinder that is in direct contact with the material is made of high-quality stainless steel and the inner wall of the cylinder is precisely polished.
Machine base:
The frame of the three-dimensional motion mixer is made of steel, and the stainless steel mirror panel is outsourced. The structure of the machine base is reasonable, and the machine can be effectively stabilized, which fully meets the GMP requirements for pharmaceutical production.
Drive System:
The drive system of the three-dimensional motion mixer consists of a motor, a transmission deceleration system, a frequency converter, and a control system to form a transmission deceleration system. The design is simple and reliable. The frequency converter can effectively buffer the inertia of heavy-duty starting, and can also accurately select the proper position of the barrel during shutdown to facilitate feeding or discharging.
The three-dimensional motion mechanism is a mixing cylinder capable of complex translation, rotation and rock motion in a three-dimensional three-dimensional space. The three-dimensional motion mixer is designed with a unique active, driven two-axis and two-axis three-dimensional motion rocker structure, driven The flexible design of the shaft makes the movement of the machine more flexible, lighter, more convenient for commissioning and maintenance. The three-dimensional motion rocker arm mechanism is made of all-stainless steel, polished and beautifully designed for use in 10,000, 10,000 and 100 clean areas.
Mixing cylinder:
The two spaces of the three-dimensional motion mixer mixing cylinder are crossed and perpendicular to each other, respectively, between the main and driven shafts connected by the three-dimensional moving rocker arm, the mixing barrel is from the barrel body, the feeding section of the straight frustum, and the eccentric frustum The discharge end, the feed port and the discharge device are composed.
The mixing drum is made of high quality stainless steel, and the inner and outer walls are polished. The cylinder has good air tightness, smooth surface and no dead angle, no residue and easy to clean.
The inlet port is sealed by a clamp type flange, which is convenient to operate and has good air tightness.
The discharge end adopts a uniquely designed eccentric frustum. The asymmetric design is more conducive to uniform material mixing. When discharging, the discharge port is at the lowest position of the mixing container, and the material is discharged.
Foot Spa Machine,Foot Tub Spa Pedicure,Foot Bath Massager,Bubble Foot Spa
Huaian Mimir Electric Appliance Co., LTD , https://www.nbmimirfootspa.com