Shandong Province Lite machinery vegetable multi-function cleaning machine instructions and steps
Vegetable multi-function cleaning machine equipment instructions:
1. Structure: The equipment consists of the main part of the tank body, sediment isolation net, lifting device, bubble generating device, hair removal device, floating filter device, circulating filter water tank, sprinkler device, gas control valve, etc. Figure) 
2, the operation steps
(1) Clean the water tank and fill it with water; inject water into the main tank until the overflow overflows.
(2) Start the conveyor belt and make the moving parts operate normally with the correct direction;
(3) Start the vortex pump, inject air into the water tank, and make the water in the tank tumbling. The equipment is equipped with multiple gas control valves. According to the difference of products and material advancement, the valve control air volume of each pipeline is adjusted.
(4) Open the spray pipe valve so that the water is evenly sprayed on the mesh belt;
(5) Check each operating part and make sure it can work after normal operation.
Vegetable multifunctional washing machine equipment overview:
1. The washing machine adopts high-pressure bubble cleaning, which can effectively separate the surface of the object to be cleaned, simulate the basic action of manual cleaning and effectively avoid the phenomenon of collision, smashing and scratching in manual cleaning, improve work efficiency and change manual operation. For mechanized processing. Suitable for a variety of fresh vegetables, salted vegetables, fungi, seafood. According to the specific gravity of the materials to be cleaned, two types of DX type and DXL type are designed. The DX type is suitable for materials with a specific gravity less than or equal to water, and the DXL type is suitable for materials with a specific gravity greater than water or fear of bruising.
The material falls into the water, and the material is stirred and washed by the water tumbling in the tank body. The heavy dirt such as sediment on the material is separated and falls into the sedimentation zone below the filter screen, and the sediment is filtered by the external water circulation to remove most of the Impurities, the externally filtered water returns to the main tank body again, which improves the water utilization rate, which can effectively save costs. The material is gradually moved to the conveyor belt under the push of water, and is lifted out of the inner tank body, and then sprayed. Wash, wash the material twice, and enter the following process.
The hair, silk thread and other impurities in the material are adhered by the hair roller when passing through the hair roller, and the hair roller is taken out regularly; the washed rinse material is intercepted by the drum filter and discharged out of the tank body.
During the working process, the spray water pipe is always supplied with water, so that the sewage in the water tank is gradually replaced.
Home Safety Full Wireless Series Product
Home Safety Monitoring Detector,Fire Monitoring Detector,Combined Electrical Detector,Safety Monitoring Detector
LIAONING YINGKOU TIANCHENG FIRE PROTECTION EQUIPMENT CO.,LTD , https://www.tcfiretech.com