Abstract: The composite fastness of the jelly cup cover film is an important factor affecting the shelf life of the jelly and the convenience of eating. Therefore, the detection of the composite strength of the jelly cup cover film should be strengthened. In this paper, Labthink XLW (EC) peel strength intelligent electronic tensile testing machine jelly cup is sealed with a plastic composite film was tested, and the test process, test principle and device parameters are introduced, so as to monitor the use of composite enterprise The composite fastness of the film material provides a reference.
Key words: jelly, composite film, cover film, delamination, composite fastness, peel strength, intelligent electronic tensile testing machine
1. significance
Jelly is a kind of dessert that people enjoy. In order to maintain the good taste and flavor of the jelly, the packaging is generally in the form of a plastic cup or an aluminum-plastic composite film bag, which ensures good barrier properties and sealing of the jelly product package. performance. The jelly in the plastic cup is usually sealed by using a plastic composite film material as a cover film. If the composite fastness between the single film of the cover film is low, that is, the peel strength between the individual single films is low, and the cover film is uncovered. The position where the damage occurs is not between the cover film and the cup body, but occurs between the single film of the cover film itself, which not only causes inconvenience to the consumer, but also tends to cause delamination of the cover film to cause the product. The barrier properties and physical and mechanical properties are reduced, which affects the shelf life of the product. Therefore, good composite fastness is one of the basic properties that a cover film material should have.
Figure 1 jelly cup cover film
2. Test sample
A composite film for a brand jelly cup cover film.
3. Testing standards
This paper is based on the standard GB 8808-1988 "soft composite plastic material peeling test method".
4. Test equipment
In this paper, the XLW (EC) intelligent electronic tensile testing machine independently developed by Jinan Languang Electromechanical Technology Co., Ltd. is used to detect the peel strength of the composite film of the cover film.
Figure 2 XLW (EC) intelligent electronic tensile testing machine
4.1 Test principle
The fixture of the device is divided into upper and lower two, the upper clamp can move at a preset speed, and the lower clamp remains fixed. During the test, the two ends of the sample are clamped in the upper and lower clamps respectively. With the movement of the upper clamp, the sample is peeled, stretched or torn, and the force and displacement changes caused by the change of the sample. The force value sensor and the displacement sensor respectively placed on the moving chuck are respectively monitored, and according to the monitoring result, the peeling strength, the breaking force, the deformation rate and the like of the sample are calculated.
4.2 Scope of application
(1) This equipment is specialized in plastic film, composite materials, flexible packaging materials, plastic hoses, adhesives, adhesive tapes, stickers, medical patches, release papers, protective films, composite covers, metal Stripping, stretching, deformation, tearing, heat sealing, bonding, puncture force, opening force, low speed unwinding force, peeling force, etc. of foil, separator, back sheet material, non-woven fabric, rubber, paper, etc. tests, such as oral tearing force of the lid, the piercing / drawing force, puncture force infusion bag cover, soft rubber stopper piercing / drawing force and the like.
(2) This equipment meets a number of national and international standards, such as GB 8808 , GB/T 1040.1 ~ GB/T1040.4 , GB/T 1040.5 , GB/T 4850 , GB/T 12914 , YBB00132002 , ISO 37 , ASTM E4 , ASTM D882 , JIS P8113 , QB/T 2358 , QB/T 1130, etc.
4.3 Equipment parameters
- The test specifications of the equipment are 50 N and 500 N , and the customer can choose according to the needs of the test.
- The test accuracy of the device is better than 0.5 , which ensures the accuracy of the test data.
- The device supports the two-way test mode of tension and compression. There are seven test speeds for the user in the pull and press directions, which are 50 mm/min , 100 mm/min , 150 mm/min , 200 mm/min , 250. Mm/min , 300 mm/min , 500 mm/min .
- The machine integrates eight independent test procedures, such as stripping, stretching, tearing, and heat sealing, providing users with a choice of test items.
- This equipment adopts the pneumatic sample clamping mode to prevent the sample from slipping and ensure the accuracy of the test data.
- Intelligent configuration such as limit protection, overload protection and automatic return to ensure the user's operation safety.
- Support Lystem TM laboratory data sharing system to achieve unified management of test data.
5. Test process
(1) Cut 5 strips each with a width of 15 mm and a length of 200 mm along the transverse and longitudinal directions of the sample .
(2) Each strip is manually stripped 50 mm in advance .
(3) The two ends of the sample stripping portion are respectively clamped in the upper and lower jigs of the device, and the longitudinal axis of the sample stripping portion coincides with the center line of the upper and lower jigs.
(4) Set the parameter information such as test speed and sample width, click the test option, and the test starts.
(5) The equipment automatically detects the change of the force value during the test, and calculates and displays the peel strength value of the sample zui based on the detected data.
6. Test results
The transverse peel strengths of the samples tested in this paper were 1.56 N/15 mm , 1.45 N/15 mm , 1.78 N/15 mm , 1.47 N/15 mm , 1.61 N/15 mm , and the longitudinal peel strengths were 1.89 N/15 mm and 1.93 N, respectively. /15mm , 2.16 N/15mm , 2.12 N/15mm , 1.93 N/15mm .
7. Conclusion
The XLW (EC) intelligent electronic tensile testing machine used in this paper is a professional testing equipment for measuring the peeling strength of the jelly cup sealing film. It has the advantages of simple test operation, high intelligence, accurate detection results and high test accuracy . Reflecting the composite fastness of the jelly cup cover material, in addition to the peel strength of the cover film, attention should also be paid to the overall sealing performance and barrier properties of the product. Labthink is a high-tech enterprise specializing in R&D and production of packaging testing equipment. Through continuous innovation of technology, we always provide customers with advanced and efficient packaging testing equipment and high-quality packaging testing services. Existing customers have covered the packaging materials. Production, food, pharmaceuticals, automobiles, daily chemicals, textiles, universities, third-party testing institutions and many other fields . The more you understand, the more you trust! Labthink is willing to promote technical exchanges and cooperation with enterprises and institutions in the industry.
Fingerprint Safe Box,Residential Safe,Biometric Safe Box,Steel Safe Box
Hebei Yingbo Safe Boxes Co.,Ltd , https://www.yingbosafes.com