First, moisture management
The soil moisture after planting was maintained at 70%-80% of the maximum water capacity in the field. In the hot season after planting, water is poured every 4 to 7 days under normal soil conditions. Water is poured every 7 to 10 days in early spring and autumn. Prolong the watering interval properly in low wetlands. Watering is generally performed in the early morning and ridge cultivation is performed in the early evening.
Second, temperature management
The indoor temperature of the shed is maintained at 25 to 30°C and the night temperature is 14 to 16°C. When the outside minimum temperature is stable at 12°C or above, it can be ventilated overnight. Prevent high temperatures exceeding 35°C.
Third, lighting management
To ensure that the temperature is not too high, try to increase the light intensity. When shaded by a sunshade net, when the temperature at the top of the plants in the sunny shed room rises to 30°C, the sunshade net is set in a position where the sun shines directly, and it is promptly retracted after cooling.
Fourth, fertilization management
When the first fruit is sitting and begins to expand, it is combined with watering and fertilizing. After each ear fruit is topdressed once or once every 10 days, each fertilizer is topped with 8 to 10 kg/mu. During the fruit expansion stage, 30 to 50 kg of compound fertilizer containing nitrogen, phosphorus, and potassium in a ratio of 1:1:1 is applied to the fruit during the fruit enlargement period, and potassium can be topdressed during fruit coloring to maturity (the ratio of nitrogen, phosphorus and potassium is 1 1:1:2) 5 to 10 kg/mu, topdressing can be applied, and can also be applied with water, and at the same time pay attention to appropriate amount of calcium, magnesium, boron, zinc, molybdenum and other nutrients, can adopt foliar spray, etc. Way to apply.
Fifth, plant adjustment
The following pruning methods can be selected based on the length of planting days and the height of the shed:
1. Single dry pruning
Use four panicles to six panicles.
2. Single dry head replacement
The three panicles are changed head and head and pruning method is repeated. The main stem is changed several times after each fruit of the three panicles. Five panicles and three panicles are changed head and pruning several times. After the main branch of the five panicles, the heads are replaced, and then each knot is 2 to 3 ear fruit for the first time; two panicles for the first time for the whole pruning method, the main branches of each fruit after the second, for several times to change head.
3 double dry head pruning
Use five panicles and four panicles to change the head and pruning multiple times.
4. Snoring to the old leaves
When the lateral buds grow to 7 cm to 10 cm, remove them. Grasshoppers are carried out after sunny leaves without dew. For old leaves and yellow leaves that grow below the ear of the lowest position, they are removed in time.
5. Hanging vines
After the first spike blossoms, hang the vines with slings. For pruning the head several times, after the fruit has been picked (3 to 5 spikes), the vine is dropped. Place the ridges under the ridges and ground them, and then change them again. The fall should be done in the afternoon. After each spike, the fruit was hung on the vine with a rope.
Six, preserved fruit
1. Flower protection
When temperature below 15°C or high temperature above 30°C appears, growth regulators should be used to decorate, wipe and spray flowers. Use Shennong No. 2 and anti-dropping agents to spray or decorate flowers, and use appropriate concentrations according to the temperature at that time.
2. Thinning and fruit thinning
When flowering, select 6 to 7 flowers per panicle, and discard the rest. After fruiting, if the fruit set is too large, remove the first fruit and the end of small fruit and deformed fruit, choose to leave 4 to 5 good fruit. The location and strength of the strong light can keep more fruit, and vice versa. When using "Bai Li" varieties, the average fruit per ear was 4.
Disclaimer: Some articles in this website have been transferred from the Internet. If you are involved in third party legal rights, please inform this website. phone
System for Indoor Camera home monitoring
Home monitoring is to use network technology to connect the video, audio, alarm and other monitoring systems installed
WiFi camera 1080P hidden The PoE switch provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. It can be used for any 10/100/1000Mbps link and supply industry-standard IEEE 802.3af/at power. Advanced auto-sensing algorithm gives power to 802.3af/at end devices, In addition, the PoE switch automatically determines PoE WiFi network requirements, speed, duplex, and cable type using Auto Uplink. Easy to operate and reliable. camera mini hidden wifi
The PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access point, IP phones, office access control systems, and other PD devices and offers a line of high quality products that provide a total solution for Ethernet application in different environments. hidden cameras
Features
8*10/100/1000mbps POE port,UP-Link 2*1000m RJ45 port+2*1000m SFP
100m Transmission Distance,1-8 port support VLAN mode
Compatible with IEEE802.3AF/AT
The specification of the built-in power supply: 120W (52V 2.3A) Full duplex
All port supported by MDI/MDIX auto flip and self negotiation
Supply 8pcs 10/100/1000Mpbs adaptive high speed forwarding data packet non-lost port.
Each port max. power supply reached 30W.
Low heat design, safe and reliable, high stability
Application: Wireless Access Point² IP Camera
Indoor Camera,Wireless Indoor Camera,Video Wi-Fi Surveillance Camera,WiFi Surveillance Camera
Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcameras.com