In order to meet the requirements of the pellets, on the basis of the extrusion granulation technology, the laboratory rotary granulator adopts a new granulation technology--crowding by improving the granulation principle of our researchers. Granulation technology, that is, the twin-screw strong pressure granulator is used as the main process equipment. After the material is wetted and mixed, it is made into soft material, and then expanded into a ball by hard extrusion, rotary pelletizing, friction rolling, drying and drying. Four steps were made to produce spherical or spheroidal particles, and the resulting particles were designated as "squeezed particles" or "compressed particles."
The squeeze granulation technology can increase the particle bulk density, increase the capsule dosage while changing the single dose; and use less or no auxiliary materials when preparing the capsule, thereby reducing the capsule dosage or reducing the capsule size. Improve patient compliance. In addition, this technology can effectively reduce the specific surface area of ​​the particles and increase the tightness of the particles, thereby preventing the adsorption of more moisture and achieving the purpose of moisture prevention. At the same time, due to the rounded appearance of the prepared particles, the true sphericity is high and the strength is large, which facilitates the particle coating, and the coating can more effectively prevent moisture.
1. The granulator is a rocking action of a rotating drum. The wet powder material can be ground into particles by a wire sieve, and can also be widely used for pulverizing and becoming a ready-made granule. 2. In the case of chemicals, the powder is used as a wet-laid powder, and after drying, it is used to compress the tablet, and it is also possible to pulverize the block which is agglomerated during storage or agglomerated during chemical processing. It is used industrially to treat confectionery and sugar blends and malt milk, and other industries such as ceramics, plastics and the like into shaped pellets. 3. It is not suitable for semi-solid, fluid, slurry or wear.
The two ends are aligned with the linear velocity of the inner and outer rings of the die plate, and the misalignment friction between the wheel and the die does not occur, the resistance is reduced, the kinetic energy loss is reduced, and the service life of the die is prolonged, which is a major difference from the similar compression molding equipment. . The utility model adopts a screw center pressure regulating mechanism, and the mold gap is large and small, and different materials are applied to ensure the pressing effect. The pressure roller adopts a large groove width, is pressure-resistant and wear-resistant, and the pressure roller adopts multiple uniform distributions, and the operation is stable, and the pressing area is increased, thereby improving production efficiency. Sawdust and straw compression molding require a lot of pressure. In the same kind of granulation, briquetting and rod making equipment, the pressure roller component is the central component of the whole equipment. The advantage of the “cone flat die†can be increased by any other equipment. For example, the ring model granulator can not be enlarged due to the diameter of the ring die, which causes the bearing of the pressure wheel to change. Small, assembled bearings do not have a strong ability to withstand pressure, bearing damage caused by the three stops of the equipment. This type of machine has a variety of compression molding. Round rods, squares and pellets can be made by changing the mold. It can adapt to different materials for compression molding and achieve better benefits. The granulating room is equipped with an observation door, which is easy to check and maintain at any time.
Equipment use: granule machine is used in pharmaceutical, food, granule, chemical, solid beverage, scientific research unit, laboratory, hospital, small health care product factory, small batch production and other industries, the mixing of the material into the required particles can also be block The dry material is pulverized into the desired granules, which is especially suitable for materials with higher viscosity. The rotary granulator is a new type of equipment. Its advantage is that it is automatically discharged, the efficiency is 2-3 times that of the swing granulator, and it meets the GMP standard. It is one of the ideal granulation equipment.
Its characteristics: the parts of the granule machine are made of stainless steel, the appearance is beautiful, the structure is reasonable, the granulation forming rate is high, the granules are beautiful, the material is automatically discharged, the granule damage caused by manual discharging is avoided, and it is suitable for running water. Using a set of inverted rotating mills, the particles are extruded through a stainless steel mesh. Especially in the food industry, it is used in the chicken production line to produce chicken essence, monosodium glutamate and solid beverages. According to the user's needs, the sieve cylinders with different apertures can be selected, and the contact parts with the materials are made of stainless steel material, which can ensure the natural color of the materials without deterioration.
The above is the full contents of the characteristics and uses of the laboratory rotary granulator that I will tell you today. I also hope that it will help the family.
The squeeze granulation technology can increase the particle bulk density, increase the capsule dosage while changing the single dose; and use less or no auxiliary materials when preparing the capsule, thereby reducing the capsule dosage or reducing the capsule size. Improve patient compliance. In addition, this technology can effectively reduce the specific surface area of ​​the particles and increase the tightness of the particles, thereby preventing the adsorption of more moisture and achieving the purpose of moisture prevention. At the same time, due to the rounded appearance of the prepared particles, the true sphericity is high and the strength is large, which facilitates the particle coating, and the coating can more effectively prevent moisture.
1. The granulator is a rocking action of a rotating drum. The wet powder material can be ground into particles by a wire sieve, and can also be widely used for pulverizing and becoming a ready-made granule. 2. In the case of chemicals, the powder is used as a wet-laid powder, and after drying, it is used to compress the tablet, and it is also possible to pulverize the block which is agglomerated during storage or agglomerated during chemical processing. It is used industrially to treat confectionery and sugar blends and malt milk, and other industries such as ceramics, plastics and the like into shaped pellets. 3. It is not suitable for semi-solid, fluid, slurry or wear.
The two ends are aligned with the linear velocity of the inner and outer rings of the die plate, and the misalignment friction between the wheel and the die does not occur, the resistance is reduced, the kinetic energy loss is reduced, and the service life of the die is prolonged, which is a major difference from the similar compression molding equipment. . The utility model adopts a screw center pressure regulating mechanism, and the mold gap is large and small, and different materials are applied to ensure the pressing effect. The pressure roller adopts a large groove width, is pressure-resistant and wear-resistant, and the pressure roller adopts multiple uniform distributions, and the operation is stable, and the pressing area is increased, thereby improving production efficiency. Sawdust and straw compression molding require a lot of pressure. In the same kind of granulation, briquetting and rod making equipment, the pressure roller component is the central component of the whole equipment. The advantage of the “cone flat die†can be increased by any other equipment. For example, the ring model granulator can not be enlarged due to the diameter of the ring die, which causes the bearing of the pressure wheel to change. Small, assembled bearings do not have a strong ability to withstand pressure, bearing damage caused by the three stops of the equipment. This type of machine has a variety of compression molding. Round rods, squares and pellets can be made by changing the mold. It can adapt to different materials for compression molding and achieve better benefits. The granulating room is equipped with an observation door, which is easy to check and maintain at any time.
Equipment use: granule machine is used in pharmaceutical, food, granule, chemical, solid beverage, scientific research unit, laboratory, hospital, small health care product factory, small batch production and other industries, the mixing of the material into the required particles can also be block The dry material is pulverized into the desired granules, which is especially suitable for materials with higher viscosity. The rotary granulator is a new type of equipment. Its advantage is that it is automatically discharged, the efficiency is 2-3 times that of the swing granulator, and it meets the GMP standard. It is one of the ideal granulation equipment.
Its characteristics: the parts of the granule machine are made of stainless steel, the appearance is beautiful, the structure is reasonable, the granulation forming rate is high, the granules are beautiful, the material is automatically discharged, the granule damage caused by manual discharging is avoided, and it is suitable for running water. Using a set of inverted rotating mills, the particles are extruded through a stainless steel mesh. Especially in the food industry, it is used in the chicken production line to produce chicken essence, monosodium glutamate and solid beverages. According to the user's needs, the sieve cylinders with different apertures can be selected, and the contact parts with the materials are made of stainless steel material, which can ensure the natural color of the materials without deterioration.
The above is the full contents of the characteristics and uses of the laboratory rotary granulator that I will tell you today. I also hope that it will help the family.
Feline Infectious Peritonitis (FIP), referred to as Feline Infectious Peritonitis (FIP), is a fatal abnormal immune response that occurs in cats. It is caused by the mutation of the feline coronavirus carried by cats. As a high-incidence and fatal disease of pet cats, the current incidence of feline abdominal transmission is about 10%.
The symptoms of cats are usually divided into two categories, namely wet FIP and dry FIP, of which wet FIP accounts for the majority of all cases. About 70%, manifested as abdominal pleural effusion, abnormal bulging; dry FIP cats have different symptoms, depending on the type of organ affected by the virus.
So far, all feline feline feline treatments are based on the characteristics of the disease, and GS-441524 can play a role in the treatment of feline feline disease. Therefore, the therapeutic effect of GS-441524 is obviously more ideal, the dose used is less, the treatment cycle is shorter, and the efficacy, safety and convenience of operation are all good. Because of this, GS-441524 is considered by many pet owners and veterinarians to be a magic medicine that can effectively treat feline abdominal infection.
Gs 441524 Fip,Fip Treatment Gs441,Gs 441524 Fipv Cats,Gs 441524 For Fip
XI AN RHINE BIOLOGICAL TECHNOLOGY CO.,LTD , https://www.xianrhinebiotech.com