Digital cement electric folding machine installation steps

Digital cement electric folding machine installation steps

1. This cement cement mortar anti-folding test machine adopts 220V working power supply. When receiving electricity, it should be noted that the yellow-green wire is ground wire, do not connect wrongly to avoid electric shock.

2. The new standard cement mortar anti-folding machine should be placed on a stable workbench. The workbench must be firm. The marble countertop is better. The front and rear width is not less than 80cm, the left and right length is not less than 100cm, and the height of the workbench should be Between 80-100cm, this is convenient to operate.

3, the laboratory should be away from the vibration source, especially when doing the test, must avoid vibration, so as not to affect the objectivity of the cement mortar anti-folding test results.